I was asked to do close ups of the contents and what I kept in my char tin. Short story long! Char Cloth of course 🙂 🙂
old tobacco tinsail needle in lid rather than on knife sheath, bag of char cloth and tinder wickfrensel lense on base, badest bee fire fuses and rope char Ive been experimenting withI keep an oilskin bag of jute in my haversackexotac nano candle to use as an extendertinder wick needs to be unwoundmake as finer strands as possibletill a small bush of feathersthe ferro rod needs to be placed on the material when striking
I’m getting into the use of extenders. Tinder wicks and candles. If your in the middle of the bush for an extended period with only one Bic Lighter, Id rather save the fuel and use either a candle or a tinder wick when trying to ignite damp material. Rather than use up all the fuel in a tool with a limited life span then to rely solely on primitive means of ignition. The same goes for the frensel lense. On a clear hot day its very easy to use when incorporating charcloth and jute twine.
I was watching the Grey Bearded Green Beret and on several of his you-tube clips he mentions preferring a longer ferro rod I think it was on his winter gear dump video. I thought Id give it a go, with the damage in my hands and found it much easier. On one course they taught to tie a piece of paracord to the ferro rod and attach it to your belt. I found it became tangled all the time. So my version was to do a reverse wrap which didn’t tangle but still filled up the pocket. I think Id only use this on certain courses where your always making fires and under a time limit for testing not for real world applications. I also tried wrapping the grip end with Gorilla tape for an emergency fire starter and ended up going with the same paracord wrap I used earlier for the tungsten strikers. in a bright color so I couldn’t loose it if dropped.
Ive been trying to sort out my belt pouch and remove all the unnecessary gear and have a fire making kit only bag. A more streamlined and lighter version.
bagerclaw on left right one I made and top a british version in hard leatherrear view I should have used thicker leather on mine for the belt strapskit contentsgoing to retire the repair items to another bag but Ill keep the DC4only items in the tin are tinder and a soft frensel lense on the baseall my fire lighting kit are in a oilskin bag. I use lawn mower cord for the firebowthe SAK and lighter go in my pocketThe ferro rod isnt in the main pic I was still making the handlesame wrap as the strikers in a previous potI was using the left side versiondifference in sizes
High Speed Steel is a tool steel used to make cutting tool material such as lathe and mill bits to withstand greater temperatures without loosing its temper, allowing it to cut faster hence the name.The Heat treatment is generally above 60 Rockwell. This steel is usually made from Tungsten or cobalt. I looked into it for ferro rod strikers, finding an 200 x 14 x 3mm piece was $80 AUD locally, $20 from Amazon and $6 each from Ali-express. So I grabbed 5 pieces to get free shipping. I’m planning on scoring with at 100mm with a grinder and breaking them in half and doing a Strider wrap over two inches to form a handle. I have tested the steel on my ferro rod . Works great and the size gives me greater purchase for my hands than the smaller strikers that come with many of the ferro rods that are bent tin looking things. Should make good Christmas presents for my bushcrafty mates.
cut to 100mm piecesstuffed up this one burnt end not covered by cordage had to rebind it. I also moved the cord from 50/50 to 60/40mm3mm paracord vs 550 cordjust have to seal the tails and make loops
Made a batch up. If I were doing it again I would use 2mm steel instead of three and stick to 3mm paracord and get some more colours. Id also cut the length to 65mm, smaller to fit in the pocket or altoid tins. I’m just using up left over pieces I had on hand.Filled in an afternoon for something different. Ill keep a couple for myself and the rest are giveaways to mates.
I was scanning sites looking for tungsten ferro rod strikers and came across the below company selling ceramic bearing blocks and had to grab one to try out. I’m amazed no one has thought of it before.
Description from seller (walkingbirdoz) on Eprey AU Here is a double fired and glazed ceramic palm stone / bearing block for use in a fire bow drill set. This SINGLE palm stone is APPROX 35 mm across (larger size also available) Back of stone that contacts hand is unglazed and slightly textured for easy handling. Very hard wearing and durable.
current collection of bearing blocks from steel to micartaglazed sideunglazed for grip texture
One lesson I learned while in Tasmania was to carry a day pack even on a 15 minute hike. Here on the mainland I can ride for 15 minutes and if I had an accident its just a matter of time before someone came along or I could call an ambulance or a taxi. Just 5 minutes off a main road and your in deep bush in Tasmania with no internet coverage. In winter I wouldn’t see another vehicle for 2 hours sometimes even several days if stopping to camp.
One hike in particular where I had trouble. The signage wasn’t marked well. Arrows pointing in all directions but no pathways. It was alright walking down hill but turn around and look back and the track disappeared into the light. It was after seeing Dave Canterbury’s post on a minimal survival kit based on the 5C’s I started to put this together in my head.
My version is not so bushcrafty but more survival based around having an injury. Its hard enough on a good day to brush together enough bracken or pine needles into a bin liner let alone with a injury. Im not going to boil water, collect undergrowth for insulation, cutting timber for a fire is eaier with a small saw. Tinder is a big one for Tasmania. Everything was wet. On the ground in the trees, everywhere. So Id add man made tinder.
I was also finding a posted 15 minute hike was taking me 30 minutes to get to the destination and another 30 to 40 minutes to return.
You may also notice two tarps mentioned. That is to use a system involving two tarps one reflective for the fire and the other to form a secondary wall which is an A-frame design with a gap at the roof for letting out smoke. If your injured then firewood is what you can collect within a 5 meter circumference.
Pack: Sord day pack Pics forth coming
Water bottles plastic x 2
Grayl Water filter
SOL Breathable Bivi
SSA Reflective Blanket
Snugpak tarp
Ridgeline
Bank Line 50m
Plastic tent Stakes x 6 also for fire starting
Poncho : weight depending on weather.Swagman roll or a gortex.
Ferro Rod
Bic Lighter wrapped in gorilla tape
Tinder
Knife Tops Tanimboca
Saw Silky Pocket Boy 170mm
Platatac Gonk mat instead of a plastic bin liner to also use as a seat pad
Went little further on the bike today, looks like we have two new wombat burrows since Ive been away. Now I have a camper , when the weather warms up Ill have to camp out down there with a thermal and see what goes on of a night.
I’m trying slowly to get back into bushcraft after the last few months of traveling and van building. I purchased two new products to try out this week An Uberleben tinder wick and a ferro rod refill from Exotac for the XL fire-rod. I couldn’t afford the full handled model of the fire rod just now but the refill is less than half the price and Ill try and re-handle it myself with a piece of deer horn.
The tinder wick Ive been meaning to either make myself or to purchase for a while. I doubt whether Ill keep it in the tin it came with but rather place it in the tobacco tin i use for keeping my tinder dry.
Ill give you a hint when seasoning a fry-pan with oil. Don’t do it inside the house . I was fanning the smoke alarm for ten minutes with all the doors open in 6 Cel degree weather.
Vitruvius, a military engineer writing about 28 BC, defined a machine as “a combination of timber fastened together, chiefly efficacious in moving great weights.” About a century later, Hero of Alexandria summarized the practice of his day by naming the “five simple machines” for “moving a given weight by a given force” as the lever, windlass, screw for power, wedge, and tackle block (pulley). Until nearly the end of the nineteenth century it was held that these “five mechanical powers” were the building blocks from which all more complex assemblages were constructed.