Category: Bushcraft (Page 20 of 35)

Wilderness Medical Kit PT 4

511 Rush 24 pack

Ive almost finished the Wilderness Response kit. I have the following to purchase but am having trouble finding anyone with all SAM Splint sizes in stock at once.

bleed kit to be moved to side pouch

The other items I can source from a local chemist. Id also like to grab two extra large general purpose pouches from SORD Australia to place on the sides of the 511 RUSH 24 just to organise the contents better instead of trying to jam everything into the main compartments. .Have the bleed kit in one side and the breaks and sprains with all other bandages in the other side pouch. Ive also added three glow sticks to use as markers and would also like to include an orange marker panel to aid in rescuers locating a patient during a rescue operation..

hypothermia kit and survival kit

Yet to Purchase:

sharpies x 2

Sam splints 2×36 1×18 1×9 finger splints x 6

2x 3 inch 2x 6 inch elastic bandages

Irrigation syringe

Burntec 4×4 inch wet dressing x 2

Saline eye rinse

Snake bite bandages x 2

internal section id like to move the rescue items to the outside of the pack

https://www.sordaustralia.com/accessories-extra-large

https://www.sordaustralia.com/marker-panel

PPE at top airway in bottom section

Land Navigation fundamentals Training Course by Kinetic Fighting

Taught by Australian Special Forces veterans, this course will give you the essential tools to expand your horizons and come back safe. Land Navigation Fundamentals is a two-day course packed with information and activities, including practical application of learned skills through navigation exercises. With no prerequisite level of fitness or experience needed, the course is suited to anyone interested in learning about or improving their skill in land navigation. Don’t be dissuaded if you already have navigation experience, as the small group format means the content can be tailored to you. Numbers are strictly limited to a maximum of 6 people*, so book now!

Land Navigation Fundamentals runs from approximately 8am to 6pm on a Saturday and 6am to 8pm on a Sunday (inclusive of breaks), with the general plan for each day as follows:

Day 1 – Navigation Essentials

We cover the fundamentals of navigation theory in the morning, followed by static navigation in the afternoon. Theory topics include:

Map reading

Bearings/back bearings

Grid-to-magnetic bearing conversions

Measuring distance

Route planning and the nav’ data sheet

Static navigation topics include:

Shooting bearings

Relating the map to the ground

Re-sections

Day 2 – Applied Fundamentals

The second day mainly involves navigating from point to point, to consolidate the learning of the previous day. This begins with route planning, covering topics including:

Map appreciation

Plotting navigation routes

Filling a nav’ data sheet

The active navigation exercises that follow include cross-country navigation and applying tips and tricks such as ‘aiming off’.

Traditional Bedroll Project

all terrain bedroll

I have finally finished my traditional bedroll, using a Blues Bushcraft Boutique All Terrain Bedroll coupled with swag straps made by Al Ainsworth at Howling Dingo Leatherworks and a secondary blanket that I had purchased many years ago from C.J Wilde at Wilde Weavery which were hand woven and made for 18th century reenacting. I found the blanket after it was mentioned in an article by Mark. A. Baker in a Pilgrims Journey Vol 1. Another 5 weeks with the leg brace on according to the physio, that will make it 6 months hobbling around. The bedroll will be one of the first things Ill be taking bush to try out over a few nights. I haven’t spent this long near towns in a long time.

wilde weavery 18th century reproduction blanket
howling dingo swag straps

Wilde Weavery

https://www.facebook.com/people/Wilde-Weavery-and-Trading-Co-LLC/100057593742091/

Blues Bushcraft Boutique

https://www.blueangelical.co.uk/products

Howling Dingo Leatherwork

https://www.etsy.com/au/shop/HowlingDingo

https://www.facebook.com/people/Howling-Dingo-Crafts/100055205061323/

All Terrain Bedroll Article

https://www.goodreads.com/book/show/2423925.A_Pilgrim_s_Journey_Volume_One

Flint and Steel with the Spine of the Knife

One of the Pathfinder Schools per-requistes is to bring a carbon steel knife. Most of the models I own for bushcraft are anything but that, I like my high end steels. There are several reasons why a carbon steel blade is preferred. Easier to sharpen on a rock if factory sharpening stones and diamond files aren’t available. Faster to sharpen than high end super steels, but also striking a piece of flint down the spine of the blade.

I have never tried this. it would also be interesting to try on different blades due to differential tempering. Where the spines are tempered softer to increase durability. Many spines may not be suited to using as a striker.

How practical is this in reality. There are only two places in Australia to find decent flint, do I want to damage a $400 knife in that way, how much damage would I do after short term use. How much of a factory coating would have to be removed beforehand. I rather buy a cheap Mora and try it out. This technique is more of a survival skill than a bushcraft one.

I read a book called Knife Only Survival by Tony Nester the idea of going into the bush with nothing but a blade and trying to survive has always fascinated me. There are several courses in the US that actually do this for up to 30 days.

So I finally have a reason to purchase a Mora knife. I have taken a quarter pound mash hammer and absolutely destroyed it by smashing apart a large piece of flint to obtain nodules. So this is definitely something I wouldn’t want to try on a LT Wright blade or an ESSE.

As a skill worth learning? I think its something Id like to try. I can see its worth overseas where flint and chert are more readily available in the field than in Australia. How many times has someone lost their ferro rod on Alone to then give up within hours.

https://en.wikipedia.org/wiki/Differential_heat_treatment

Flint and Steel (Non Charred Plant Tinders)

A List of Plants Id like to Test:

Pacific Waterleaf Hydrophyllum tenuipes similar species Surinam Purslane

Great Burdock Arctium lappa

Stinging Nettle Urtica dioica

Fireweed Senecio madagascariensis

Milkweed Euphorbia peplus

Cattail Typha latifolia

Phragmites grass

Several of these plants grow in Australia. I swear Ive seen Pacific Water Leaf some where. However there are several similar plants Id like to see If I can process to a use-able material for using with a flint and steel without charring.

https://en.wikipedia.org/wiki/Urtica_dioica

https://en.wikipedia.org/wiki/Arctium_lappa

https://en.wikipedia.org/wiki/Hydrophyllum_tenuipes

https://inaturalist.ala.org.au/taxa/77472-Hydrophyllum-tenuipes

https://greenharvest.com.au/Plants/Information/SurinamSpinach.html

https://www.abc.net.au/gardening/how-to/water-loving-natives/13150502

https://en.wikipedia.org/wiki/Chamaenerion_angustifolium

https://en.wikipedia.org/wiki/Typha_latifolia

https://en.wikipedia.org/wiki/Phragmites

Cooking Temperatures With Camp Ovens


Heat Beads


300F 150C 12-13 top 5-6 bottom
300F 180C 177-18 top 9-10 bottom
400F 200C 18-19 top 10-11 bottom
450F 220C 20-21 top 10-11 bottom


Wood


Paper Test
Dark Brown – oven is very hot 240-250 C
Light Brown – oven is hot 220 to 230 C
Yellow – oven is moderate 180 to 190 C
Pale – oven is slow 120 C


Hand Test
If you can hold your hand 18 inches over the coals for a fast count of 5 the approximate temperature is 180 C


Flour Test
Throw a few pinches of flour into the camp oven If it doesn’t turn brown within five minutes the temperature is around 120 C (Low), if it goes brown in colour the the temperature is around 180 C( Moderate)

Flint and Steel (The Drag Method)

I’m getting more and more into the traditional side of bushcraft. I tend to wander back and forth between using primitive and traditional methods, but keeping to the three forms of lighting a fire rule of always carrying more than one type available to me.

I came across the following video of using a drag method of striking a piece of flint to conserve the edge.

Setting Up A Plow Point Tarp (The Knots)

Ive been trying out a few different knots in an effort to learn the best combination for setting up a plow point tarp and came across the below you-tube clip by Taro Movies Swiss Bushcraft and Survival that uses a short length of cordage and incorporates an Evank Hitch to the tree and a Taut Tarp Hitch to the tarp for adjust-ability. I thought this was a great combination of knots I already use for A-frame tarps. It just never occurred to me to use the same knots for a plow point in that way.Ive been using the plow point or diamond fly set up more and more to have protection on three sides and I can have a fire out the front. I’m also using canvas tarps more than nylon, so trying to get tension on a heavy 3×3 canvas tarp is much harder when setting up an A-frame.

In the second video Turtle Bushcraft shows a great modification to the ridgeline in order to hold up the center seam.

Wilderness Medical Kit PT 3

First Order from Tacmed Australia has arrived.

casualty cards
guedel airway kit and nasopharyngeal airway
pocket bvm next to wallet for size reference
side view and thickness
reference card set of 4
opposite view
stowed in my OBS kit
heavy duty mylar blankets
had to get a couple of patches for bag
« Older posts Newer posts »

© 2026 Serat Bushcraft

Theme by Anders Noren — Up ↑